Products

ARDEX X52

ARDEX X52 is an economical rubber modified adhesive for fixing ceramic tiles in internal and external (with satisfactory falls) situations. It can be used over render, plasterboard, fibre-cement sheet and concrete in situations where minimal movement is anticipated. When mixed with water, a flexible mortar that meets the S1 tile adhesive classification is produced.

ARDEX X18

ARDEX X 18 is a superior white polymer fortified cement-based wall and floor tile adhesive that has been specially formulated with mastic type properties. It contains specially developed fibres that add strength to the tiled area. ARDEX X 18 has an extended open time, is non slump and flexible.

ARDEX ISOFLEX

ARDEX X52 is an economical rubber modified adhesive for fixing ceramic tiles in internal and external (with satisfactory falls) situations. It can be used over render, plasterboard, fibre-cement sheet and concrete in situations where minimal movement is anticipated. When mixed with water, a flexible mortar that meets the S1 tile adhesive classification is produced.

ARDEX LQ 92

ARDEX LQ 92 is a cement based underlay for levelling uneven concrete floors prior to tiling. When mixed with water, ARDEX LQ 92 provides a smooth, pourable, free flowing and self smoothing material that can be applied to a thickness of 25mm down to a feather edge. Greater thicknesses can be achieved with an multiple layers or by the addition of aggregate.

ARDEX MULTIPRIME

ARDEX Multiprime is a water-based primer used for improving the adhesion of ARDEX products to various porous substrate. It is easy to apply with a sponge, brush or roller with applications of subsequent products able to take place with minimal downtime.

ARDEX Multiprime is suitable for both internal and external, wall or floor applications.

ARDEX P9

ARDEX P9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates. It is easy to apply with a brush or roller with applications of subsequent products able to take place with minimal downtime.

ARDEX P9 Single Part Primer is suitablefor internal and external wall or floor applications.

Liquid Flash 1

A premixed one-pack, grey, waterbased, microfibre reinforced acrylic flexible waterproofing membrane that is easily applied with a brush to form a resilient waterproof/flashing membrane between different building surfaces.

Gripflex

A white flexible polymer modified, water resistant, fast setting, cement based adhesive for bonding ceramic and stone tiles to porous and non-porous surfaces subject to vibration and thermal movement.

Monoflex

A premium water resistant, flexible rubber based, fast setting, cementitious adhesive for bonding ceramic and stone tiles to porous and non-porous surfaces subject to vibration and thermal movement.

Kemcrete

A multipurpose, acrylic primer/bonding/waterproofing agent for concrete, screeds, renders and cement based pre-mixes to masonry surfaces

An acrylic liquid based admixture and primer for concrete and mortar mixtures.

Shower Fix

A siloxane/solvent based material that penetrates deep into the grout and porous tiles, forming a water-repellent barrier. Is not a coating, coatings fail if chipped or scratched and wear due to ordinary cleaning. Coatings need to be reapplied constantly and once damaged are next to useless.

Hydralite

A premium, white, multipurpose, ceramic tile adhesive suitable for permanently immersed applications

A premium, white, multipurpose, polymer-modified adhesive suitable for permanently immersed applications using lightweight technology.

254 Platinum

254 Platinum is the ultimate one-step, polymer fortified, thin-set adhesive. For interior and exterior installation of ceramic and stone tile, reduced thickness porcelain, quarry tile, pavers and thin brick. 254 Platinum provides long open time with unsurpassed adhesion and workability. Designed to just mix with water. Suitable for immersed installations.

335 Premium Flexible Adhesive

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation. Exceeds the requirements of AS ISO13007.1&2 classification C2TES1. Excellent for exterior and underwater applications, supeior bond to masonry.

Ardex WPM 155 Rapid

ARDEX WPM 155 Rapid is a water based polyurethane-acrylic waterproofing membrane developed for high performance under-tile waterproofing.

Construction Chemicals Liquid Flash 1

A premixed one-pack, grey, waterbased, microfibre reinforced acrylic flexible waterproofing membrane that is easily applied with a brush to form a resilient waterproof/flashing membrane between different building surfaces.

Construction Chemicals Liquid Flash 2

A two-pack fast drying, microfibre reinforced, cement/acrylic flexible waterproofing membrane that is easily applied to form a resilient waterproof membrane over different building surfaces. Will remain pliable and elastic and will bridge cracks and smooth irregular surfaces.

Hydro Ban Waterproofing Membrane

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

DryTreat Stain-Proof

STAIN-PROOF Original™ is suitable for a wide variety of indoor and outdoor applications in residential and commercial buildings, including: building facades, floors, walls, countertops, showers, swimming pool surrounds, patios, garages, kitchens and entertaining areas.

Dribond Micro Seal

A clear solvent based sealer for protecting polished porcelain, stoneware, marble, granite and unpolished natural stone surfaces from moisture and helps reduce staining.

Lithofin MN Stain-Stop

This special impregnator optimally protects absorbent, stain-sensitive natural and engineered stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. Poses no health concerns once dry.

ARDEX FG8

A smooth, flexible cement-based grout with improved colour integrity. ARDEX FG 8 is suitable for tile joints 1-8mm wide and is exceptionally easy to use on walls and floors.

Features:

• Excellent workability
• Strong uniform colour
• Easier to use
• Smooth finish, flush joints
• Mould resistant and water repellent

ARDEX FSDD

Non-sanded cement-based, wall and floor grouting compound which is specially designed for polished porcelain to avoid scratching the surface of the tile.

Features:

• Water repellent due to special hydrophobing agent
• Dirt resistant – longer lasting new look, as dirt is unable to enter grout
• Contains ARDEX Grout Shield to combat mould growth
• Walk on after 5 hours

ARDEX EG15

ARDEX EG 15 is a high performance epoxy grout designed for situations that require strict standards of hygiene, high chemical and physical resistance.

Features:

• Exceptionally easy to clean up during application
• It can be used in joints up to 15mm wide
• Can be used both on walls and floors

SPECTRALOCK® PRO Grout* by Laticrete

SPECTRALOCK PRO Grout* is a patented, high performance epoxy grout that offers colour uniformity, durability and stain resistance with extraordinary ease of use.

SPECTRALOCK PRO Grout* is designed for use on ceramic tile, glass tile and stone applications, both residential and commercial. It can be used both interior and exterior on floors and walls. Ideal for re-grouting applications, SPECTRALOCK PRO Grout* is perfect for swimming pools, fountains and other wet area applications.

Kemgrout Flexible by Construction Chemicals

Waterproof tile grout – mould and fungi resistant

A dense, smooth, hard wearing, flexible polymer modified portland cement floor and wall grouting compound with resistance to mould and fungi growth for joints up to 5mm wide.

Features:

• Easy to use and clean
• Dense, flexible and hard wearing
• Colour match tiles
• Mould and fungi resistant

Note: Only available in Townsville

Kemgrout Sanded by Construction Chemicals

Fine-finish waterproof tile grout – chemical & acid resistant

A fine-finish dense hard-wearing waterproof portland cement, floor and wall grouting compound with resistance to mild chemical and acid attack for joints 2mm to 10mm wide.

Features:

• Fine-sanded grout with a smooth finish
• Easy to use and clean
• Dense, hard-wearing
• Colour matches tiles, stone, slate etc.
• Resistance to mild chemicals and acids